Deadpool Elite Alpha Trooper

Here we have another one of Sam's Deadpool blasters. Since it's half for looks and half for shits & gigs, Sam went all out on the damage. Literally, I was sitting across the room working on something and he pulled out a knife and started stabbing the shell with it, was throwing it on the ground, and it may or may not have been thrown off the parking garage (wouldn't be the first time). The goal was to make it look like it has literally gone through hell, and was used to blow somebody's brains out from ~ 12" away. Anyways, here's what we got.

Specs:

• Deadpool blood-spatter themed red/black paintjob with heavy shell damage
• OMW 2x upgrade spring

BANG! BANG BANG! BANG BANG BANG!

Stryfe/Rough Cut Masterkey Gear of War Cosplay Piece

We got an odd request to make a stryfe/rough cut masterkey that would serve as a Gears of War cosplay prop (fully functional though). Before anyone goes off about the absence of an orange tip and the nearly all-black paintjob, this was specifically requested by the commissioner, who assured us that a temporary orange tip and extreme caution/safety would be used in cases/places that warranted it.

Specs:

• "Flat Dark Earth" paintjob - black vinyl dye primer coat, Ultra-flat black main coat, matt clear coat). Came out very "earthy"
• Bloody red Gears of War cog tag logo
• Masterkey style integration
• Selective-slamfire capability on forward pump
• Pesky top-lock removal
• 18 round mag with notch and shaving to work in reverse
• Mag painted to mask ammo count, except for single stripe

Jolt Priming Bar Shortening

We had a commission come in where the owner wanted a Jolt to have the last inch of the priming handle be removed and be able to reattach via screw. We don't judge, so we accepted.It's now removable via a 6-32x machine screw and nut. The screw fully nests into the bore of the priming bar, so it can effectively lengthen the bar if not screwed in all the way.

Sam's Deadpool Hammershot Pair

Here we have Sam's pair of Deadpool themed Hammershots (to pair with his invitational costume and Stryfe set). Blood spattered (and by spattered we mean bathed) paintjob and zany Deadpool characteristic quotes (which, granted, could have been written better), but c'mon, it's DEADPOOL.

 Sam's Deadpool Costume

 Also, if you haven't bought/played this game yet, 

GO BUY IT, GO BUY IT AND PLAY IT RIGHT NOW!!!!!1!!!!!

100th POST BLOWOUT BONANZA: Blade 180 Rapidstrikes!

In honor of our 100th post, I present to you: JSI's first Blade 180 motor swaps. These things are insane, and due to the cold weather and lack of chrony, I unfortunately did not get a range test or fps data.

Anyways, these are the definition of OP. I wouldn't want to shot with them and I made them. They scare me. They're probably louder than a chainsaw; wouldn't surprise me.

All 3 models have exactly the same specs, and are all similar paintjobs. 

Specs:

• Red/Black marbled blood spatter paintjob (black vinyl dye primer coat, red main coat, matte clear coat)
• Complete internal rewire with 18 AWG wire
• Motor swap with Blade 180 motors (L/R) with resettable PTC fuses
• Shell modification to support larger LiPo packs (3S 5500mAh+)
• Battery pack: Bias 3S 25C 5500mAh LiPo
• Genuine Deans connectors
• EGP20F diode on pusher motor for ROF stability
• Custom vinyl lettering on side: "TCK"
• Pain comes standard

Full Order

These are like 98% the same as TorukMakto4's setup as seen in this video, I wish that I would have thought to video the performance before packing them up to send off, the commissioner needed them (across the country) for a Nerf war happening on Saturday so these were shipped pretty much right after completion and testing yesterday (Tuesday).

Video: https://www.youtube.com/watch?v=K8HRta1RJA4

Putting the "strong" in Strongarm

Here we have a recently commissioned Strongarm, with the OMW Strongarm final stage kit. For a turreted sidearm with the ARs still intact, this thing is a laser. L A S E R.

Specs:

• Red/Black marbled blood spatter paintjob (black vinyl dye primer coat, red main coat, matte clear coat)
• OMW Strongarm Final Stage w/ metal trigger
• Peg deletion for rear-loading

 Stay tuned for the big news...

Catching up

We've gone dark for a few months now, but rest assured we're still here working away in the background. Just posting the last few things we've finished to get caught up for (hopefully) what will be a crowning achievement tomorrow (possibly?).

Anyways,

"Sam's Signature Russian Camo" Rapidstrike Masterkey

"The Punisher"-themed Stryfe

And this LSK on a Rampage stock we built for a guy (plastic welded into a single solid piece).
No lie, it ain't going anywhere. Removable only by the two stock receiver screws (as per request).

(We didn't do anything else for this gun, like the jank chrome duct tape)

Stay tuned, cause we're back biznitches.

Red Strike Elite Alpha Trooper - JSI Edition

Here we have a pretty standard haul on an EAT with a nice Red/Black repaint that the commissioner dubbed "the JSI Edition Red Strike series." Hey, we don't have a problem with that, when the first words out of his mouth were "it looks like the plastic came out of the box this way." Oh the wonders of vinyl dye and clear coats. However, we were asked to retain all orange pieces as orange for HvZ legality (Purdue is cracking down on it's "simulated firearms" bs rules...).

Specs:

• Red/Black "JSI Edition Red Strike" paintjob (3x black vinyl dye undercoat, 2x red Krylon main coat, 3x matte clear top coat.
• Basic internals (AR removal, Half-lock & bolt lock out - slamfire lock obviously retained)
• OWM 2x spring addition
• Imbued with the badass, zombie slaying spirit of 1000 fallen soldiers (really) (but not really) (but really).